Hydraulic Disc-brake Device

PS50 Hydraulic Disc-brake

Model :　PS50 Hydraulic Disc-brake

Introduction :

　Co-operating with Baoji Oilfield Mechanical Corporation (BOMCO) and Dagang Oilfield in 1998, our Plant firstly equipped dual-loop hydraulic disc-brake device with 3 sets of 4000m-route drilling rig winch in our country. In 1999, we successfully handed over 5 sets of brake-disc of drilling rig for Daqing Oilfield at one time, thereafter, by endlessly improved, up-graded, popularized, our disc-brake devices are approved more and more at home. We have supplied total 460 sets of mechanical brake handle and electronic brake handle for 1500m~12000m route drilling rig. In 2014, we product 160 sets just in 1999. Service tongs and safety tongs manufactured by ours are patent product.
Characteristics of our disc-brake device.
1.Number of service tongs and safety tongs are on an equal matching according to number（same to 9000m,12000m rig），brake torque of service tongs and safety tongs are meet requirement of max.brake torque (more than the requirements stipulated in national standard), as result,brake combined torque is much bigger，which avoids accident taking place frequently caused by number lacking of  safety tongs (parking tongs) and small brake torque of safety tongs.
2.By taking advantage of experience of abroad，electric ctrl pneumatic valve is adopted to loop ctrl of electronic brake handle in order to control hydraulic direction-changing valve to realize working ctrl of brake tongs, which avoids liable valve blocked accident  caused by overheating from big electric-magnetic power of hydraulic direction changing valve. 
3.Dual fail-safe design is adopted in the ctrl loop of safety tongs. Hydraulic direction changing valve is set as one opened and one closed，that is to say,one for used the other for reserve working together, which avoids valve blocked accident cause by overheating and particle in the oil.
4.Equipped with hand pump, which can ensure brake-brake device working at any time on the working condition without power and pneumatic supply 
5.Equipped with oil feeding and self-circulating filtration device, which can reduce pollution of hydraulic system，and mostly reduce breakdown.

Technical parameter：

System rated pressure　　　　　　　　　　　　　　　　6.5MPa

Rated flow of system　　　　　　　　　　　　　　　　　2X20L/min

Maximum brake moment of normally open tong　　　　　135kN.m

Maximum brake moment of normally closed tong　　　　　135kN.m

Maximum brake moment of emergent brake　　　　　　　270kN.m

Brake disc size（ thickness×diameter）　　　　　　　　　76×1600mm

Center height of assy　　　　　　　　　　　　　　　　　850mm

[Prev] Disc Brake

Home >> PRODUCTS >> Hydraulic Disc-brake Device

PS50 Hydraulic Disc-brake

[Prev] Disc Brake

PRODUCTS

Company profile

Organization

Enterprise qualification

Cooperative partner

Company dynamics

Industry information

BOP Handling System

Hydraulic Disc-brake Device

Hydraulic Station

Hydraulic Cathead

Drilling Rig Moving Device

Hydraulic Drawwork

Hydraulic Ctrl Box

Hydraulic Cylinder

Power Swivel

Other Products

Machining Workshop

Plate-work Shop

Assembly Workshop

Testing equipment